|
: Cant inject more than 79.7 mm3??? messejme 08-05-2008, 11:24 PM what @#$ table is limiting me??? 0720 and 0721 are maxxed out at 3000 ms across the horizontal 0727 is maxxed at 100 mm3 across the horizontal 0751 and 0752 are maxxed out at 120 across the whole table LBZ_GMC 08-05-2008, 11:58 PM what @#$ table is limiting me??? 0720 and 0721 are maxxed out at 3000 ms across the horizontal 0727 is maxxed at 100 mm3 across the horizontal 0751 and 0752 are maxxed out at 120 across the whole table check maybe 0728, and 747, either of those could be limiting. Chris611 08-07-2008, 10:19 AM Are you saying that you can't inject more than 79mm3 because of your log? If so, I ran into that and it's a logging issue. I can't remeber the exact PID to select, but one maxes out at 79mm3. You have to select a different one and that will allow you to see higher numbers than the 79mm3. I will check tonight the exact PID's, but I'm sure someone will chime in here sooner. Hope that help. Chris messejme 08-07-2008, 05:25 PM thanks to all chris your right on the money RaceHemi 08-08-2008, 10:58 AM Chris is correct, you are injecting up to 100mm3 but the default PID is capped at 79mm3. The correct PID you want to monitor is GM.FUELQ_MAIN_DMA. You may have to verify that your Cal_link.txt file located at X\Program Files\EFILive\V7.5\Configuration also references the correct PID's. Are you saying that you can't inject more than 79mm3 because of your log? If so, I ran into that and it's a logging issue. I can't remeber the exact PID to select, but one maxes out at 79mm3. You have to select a different one and that will allow you to see higher numbers than the 79mm3. I will check tonight the exact PID's, but I'm sure someone will chime in here sooner. Hope that help. Chris lakingslayer 08-08-2008, 12:14 PM Chris is correct, you are injecting up to 100mm3 but the default PID is capped at 79mm3. The correct PID you want to monitor is GM.FUELQ_MAIN_DMA. You may have to verify that your Cal_link.txt file located at X\Program Files\EFILive\V7.5\Configuration also references the correct PID's. :exactly: | ||