|
BullydogPowered 03-02-2005, 08:03 AM Anybody had any troubles with the heat/ac blower? Turned mine on this morning and smelled like electrical fire, will only run on setting 5. I had it at the mechanics yesterday to install a boost gauge and then this happens. Could they have damaged something yesterday while installing the gauge? devine22 03-02-2005, 08:58 AM I had this happen on my 2002...I can not remember what the dealer called the part, but it is like a fuse directly bhind the dash that runs your blower. They just replaced that, took about 20 min. I had the same symptoms with the horrible smell and it would only blow air on the highest setting. diesel66 03-02-2005, 10:15 AM Sounds like it could be a failed variable resister, only allowing the fan to work on high(no resistence). Cobra#3747 03-02-2005, 10:15 AM most likey the blower motor resistor went bad. Pretty common problem these days. Its actually a circuit board now instead of the old coiled wires. BullydogPowered 03-02-2005, 04:37 PM thats what the mechanic said it was, the resistor. Is this fairly common? i would assume so since i got a few replies. | ||