I'm in the process of removing the door panel. I see 2 visable screws, 1 under the pull handle and the other in the middle of the panel underbottom. I can see that it lifts up after all the fastners are loose but don't see anything else to take off to free the panel so it can slide up.
Can someone tell me what else needs to be removed to free up the panel for removal???:help:

Thanks guys.
RON

Bethron1,

Here is the link to the TTT installation .pdf file. It has detailed directions for door panel removal.


http://www.ttt-mirror.com/pdf/FittingInstructionsGM.pdf

Pry out the manual lock on the door. There is a 7MM bolt under there.
There should only be one other.
I don't have or didn't have to remove the one you say is on the middle of the panel underbottom.

Quick note...on 2004's the bezel that holds the doorlock switches does NOT pop off. There is a screw that holds one side on. Remove all the other screws and take the panel off to access the screw from behind.