Pixall
06-21-2008, 11:46 PM
in the process of building my 08 5500 LYE and am ready to move on to the tranny. has anybody done transmission work on a brand new topkick allison 6 speed, or have the info i need (part #'s) to make ordering the right parts as easy and painless as possible. need a TC, transgo, and all the other stuff to handle very heavy loads, and a heavier foot.
Thanks
FlipinPips
06-22-2008, 02:59 AM
Try these guys http://www.suncoastconverters.com/
brave313
06-22-2008, 07:36 PM
in the process of building my 08 5500 LYE and am ready to move on to the tranny. has anybody done transmission work on a brand new topkick allison 6 speed, or have the info i need (part #'s) to make ordering the right parts as easy and painless as possible. need a TC, transgo, and all the other stuff to handle very heavy loads, and a heavier foot.
Thanks
Do you have any pictures of your truck. I want to do the same with my transmission. I have an 08 Kodiac C 5500 2 WD
Pixall
06-22-2008, 10:29 PM
pics of the new 08 5500 4x4 with 22.5's and etc. (http://www.dieselplace.com/forum/showthread.php?t=245865)
her are some pics. i plan on calling suncoast anyway, just hoping somebody could save me the trouble of dealing with this stuff with some guy in another state over the phone. guess i dont have a choice.
i will post #'s and prices after i find out what i need to order. hopefully tomorrow!
Morse
06-22-2008, 11:36 PM
I don't have an 08, but I have a fresh tranny. I don't plan on going over 500hp at the wheels. I went with a transgo, suncoast 1054 converter, and a high flow valve.. Mine is being installed thursday..
brave313
06-26-2008, 10:49 AM
I spoke to suncoastconverters and they were very helpful you need to give them a call and tell them what you are looking to get out of your truck
gasuout
06-28-2008, 01:58 PM
PM Mike L.
He is an awesome guy and will give you alot of time on the phone .
714-870-7300 M-F ... 8-5
kodiak
06-28-2008, 10:52 PM
I am pushing 500HP depending on my tune...and Mike L did my trans. Works flawlessly and he is currently developing a trans cooler for our trucks too.