I have a 1985 cucv m1009 6.2 blazer. I think I ran out of fuel and cannot get it started. Can someone help

I have fuel at filter on firewall and opened lines at injectors and have fuel weeping out there. The Blazer has the new 60g glow plugs. I was driving down road and it died that was it.

i found this using the search button at the top, sounds like your problem.
http://dieselplace.com/forum/showthread.php?t=21579&highlight=6.2+injector

also a couple of post i read concerning this issue also say a weak injector pump, will still have enough pressure to weap at the injector lines but not enough to atomize at the injectors, are you getting any smoke while cranking or nothing at all?

If the fuel system has been opened recently, you could have an air leak problem. Check all the fittings, bleed screws, hoses, etc., that might have been loosened or moved. Those bleed screws are notorious for letting air into the system. If that fails to turn up anything, check the inlet line at the filter. Have someone crank the engine to see if the fuel supply pump is working. Let us know.