http://www.dieselplace.com/forum/smileys/Clap.gifI had a local dealer say that they should start shipping by Friday. Not going to hold me breath, but he sounded very confident.http://www.dieselplace.com/forum/smileys/Clap.gif


Let me know if anyone else has heard otherwise!


Mikehttp://www.dieselplace.com/forum/smileys/Cool.gif

Here is a dyno test with it


Robert


http://forums.pickuptruck.com/showflat.php?Cat=&Board=UBB11&Number=285300&page=0 &view=collapsed&sb=5&o=&fpart=1

I read the post that the link references, and it sounded to me like the install was quite simple. So, does this mean the attitude is able to read boost/EGT from the CAN stream? Is that data available, or is there also a pyrometer/boost tap involved with the Attitude?


John

John-


My understanding is it will read boost from the electronics without having to "T" anything. However to get the EGT reading, you will still need to tap the manifold for the probe.


Bob

That is the same info I heard. Plus it will act as a g-tech displaying 1/4 and 0-60 stuff. Suposed to be pretty sweet!http://www.dieselplace.com/forum/smileys/Clap.gif


Mike

Having the G-Tech feature, will that mean you will have to get it as level as possible, then calibrate it like the G-Tech?

?? my source on the monitor says that it has been pushed out to OCT 1st now for release.... ALso he said that it ONLY has 4 power levels, highest being 90hp, not 5 levels going up to 120hp as others have speculated????


Can anyone figure this out??





I'm about ready to cancel my order and place it with CON'S instead, seems like he has better info and seems to know more about what this box has and will really do. CON's any idea if you will have them before OCT 1st, and can you confirm if it really has the 5 power levels or not? If you can get them before the other guy i will place my order with you instead, Thanks





Thanks!Edited by: gsxr1216

Did anyone look at the stock dyno numbers?? I wonder how they got 627 ft/lbs from a stock truck since GM only rates the motor at 320 Hp and 520 ft/lbs. When runing in 5th gear which is over drive it will show less power than when running in 4th(direct), so how is it make more Hp and torque than the motor makes to start with. We all know the Juice works well but something is wrong with their test data.http://www.dieselplace.com/forum/smileys/Disapprove.gif

Once this is "in someone's hands", it would be nice to know what actually comes with the Attitude.


The Boost and EGT readings, wired and sensors similar to standard guages?????........ Can't get a straight answer from anybody right now.........


What comes with the "Pyrometer Kit"???????


To make matters worse, rumor has it that it (the Attitude) won't be available with the Hot Juice......


Ugh................http://www.dieselplace.com/forum/smileys/Confused.gif

i talked to edge.....actually sent my 3.61 hot juice back to them to get it ready for the attidude monday....the sent it back already no attidue reflashes for at least 2-3 more weeks arron told me wednsday......there still may be additional horses is all i can say!!!!...as far as i know from edge that a few betas (attidues) have been sent out ....kennedy has one, I'VE HEARD NOT FOR SURE ......

Good to know! Keep us posted. I have not heard any more.


Got any pics of your rig? Have yet to see one on here with stacks.


Mike

mike no pics...i will get it fugured out how to post them....i'll stay itouch about juice and attifue

Thanks!

I found pretty detailed information on the Attitude over at Kennedy Diesel:

http://www.kennedydiesel.com/detail.cfm?ID=276 (http://www.kennedydiesel.com/detail.cfm?ID=286)





The Diesel Page is BACK! http://www.dieselplace.com/forum/smileys/Clap.gif I'm going home. http://www.dieselplace.com/forum/smileys/Big Smile.gif


http://thedieselpage.com


Burner------->http://www.dieselplace.com/forum/smileys/Big Smile.gifEdited by: Mackin

The monitor comes with five levels but if you have the hot juice you get 6!!! thats the latest I've heard. 145hp possible. Figure if the juice comes with the 120 what about the boys with the hot box. they spent money they didn't need to. Anyway Oct 1st is the new date.


two weeks two weeks two weeks. Whats two more.


When it gets here we'll all know!!!!!
<DIV>Con's Performance Chips
2200 Overland
Burley Id. 83318
208-431-0835
http://www.consperformancechips.com (http://www.consperformancechips.com)
</DIV>

Good morning Con, how much for the pre filter for the stage II?

The big question: Are there any costs associated with returning our present Juice to Edge and getting the connector(s) added along with the reflash? Not as big a question: Does the monitor include a pyro probe kit with it? If not, will any standard probe work if spliced in? That question answered gives me about two or three weeks to get a probe and install it in anticipation of the day/week/year it finally goes to market.


Patience: My challenge this wifetime.http://www.dieselplace.com/forum/smileys/Ermm.gif

My understanding is the monitor is complete with probe. $299.00 to return your box to Edge and that includes the monitor. If not send it to me and I'll include it for that but my source say's it includes the monitor


Con's Performance Chips
2200 Overland
Burley Id. 83318
208-431-0835
http://www.consperformancechips.com (http://www.consperformancechips.com)

Well it is now Sunday! how about some information on the new controler? Inquiring minds want to knowhttp://www.dieselplace.com/forum/smileys/Big Smile.gif

Anybody get their "Attitude" Yet ???????http://www.dieselplace.com/forum/smileys/Ermm.gif

NO........ but man I like that avatar

LMAO I was thinking the exact same thing Sdaver...Everytime I see that avatar reminds me of a song bout a guy who likes big tits. But SOB I cant remember the lyrics..funnier than hell. "See them walking down the street... left and right.... I try to look away...I like big tits"

Joe Walsh sings that song. "that's a big 10-4 big tits"


rofl.

"I.L.B.T.S."

That avatar Rocks. I seriously have to calm my self down everytime I see it!http://www.dieselplace.com/forum/smileys/Tongue.gif Anyone know where I can find some of those? http://www.dieselplace.com/forum/smileys/Big Smile.gif


As for the attitude. No word yet???????? Im getting the quad anyway. Maybe in a year from know when the attitude comes out Ill get it.http://www.dieselplace.com/forum/smileys/Confused.gif





Mike

I have read that the Attitude will be here the second Friday of next weekhttp://www.dieselplace.com/forum/smileys/Clap.gif

Still no update on a delivery date?