With some advice from this forum I ended up purchasing a wheeled skidsteer over tracks. Unit came with BH30 backhoe attachment and Big Tex trailer. 2005 with 27 hours on it. I picked up a Bradco trencher of E-Bay and 2 more buckets for backhoe. Now I have 12" 18" 24" quick pin. All I need is the breaker.

that's a nice package put together

Lots of good attachments you wont be disappointed any with that looks like you need the lexan glass with Ac/heat and radio to listen too then you be set

Looks good,

We run two 268 b's and a 272 C, the a/c is great/lol.

We're trading in the 268's for 272's, we need the heavier 8,500lb units for cold planing. We use Zieman trailers. The breaker works good on our units.

let me know the S/N and I'll tell you the know repair history w/ cat if you want. Also the build sheet.

let me know the S/N and I'll tell you the know repair history w/ cat if you want. Also the build sheet.
Owner gave me build specs and Cat printout. Machine serial number SCH01202 and motor gga09234 pin CAT0252bksch01202.She paid $37093 plus $2874 in tax.Invoice date 12-22-05 Dont think they ever had it serviced or repaired. It was used on 1 job for 27 hours then her husband the Contractor got sick and died. It sat for 8 months before she listed it for sale. I have put a hundred hours on it since I bought it. The diesel needed to be changed it had a cracked fuel line and the fuel filter on top of the fuel pump was gummed up from sitting for 8 months. Only problem I have had with it is it drips a little hydraulic fluid from a bolt on bottom of drive motor. I have tightened it twice but starts to drip after a few hours. Only way to locticite it or silicon it is if I use a lift and access bottom plate and drain the fluid and then loctite bolt and reinstall. Looks like a drain plug bolt.

Looks like it was sold by Johnson Machinery back on december 22 of 2005 to a Millwood Construction Co. They paid for a 24 mo 2,000 hr Powertrain warranty that expired dec 22 of 2007. It has had one hyd cyl replaced/repaired at 3 hours from a leak. No updates are needed on the unit and there are no known issues. If you have one give me a shout I'd be glad to help ya out. I'll check w/ our guys on the oil leak issues, I'm on the heavy end of sales (and service) so I don't really mess with CCE stuff. A little RTV sealer should do the charm if you can get to it.

What do you need that machine for? are you a contractor?