Mackin
02-20-2005, 01:00 PM
Is there one or more yet?
|
Joey D 02-20-2005, 03:11 PM I thought that Fabtech had a dual kit that bolts in. Carbon04 02-20-2005, 03:34 PM Bilstein has one in the works, it may be out already........................I talked with the rep at the PRI show. It should be a drop in replacement. JakeGMCHD 02-20-2005, 08:04 PM Here's Rancho information from another thread here. I talked to Rancho today and they said # 5407 requires a bracket kit or to use the stock location you need part # rs5411. So if you have one installed in the stock location, CHECK part # or make sure you have the bracket also. tophog 02-20-2005, 10:08 PM the fabtech works just fine ... bolts right up, no extra hardware/bracket required. JohnnyO 02-21-2005, 12:12 AM the fabtech works just fine ... bolts right up, no extra hardware/bracket required. Do you have to take out the old stabilizer? How do you know if the stabilizer is bad? Hound 02-21-2005, 12:34 AM Do a search of the forums about the Rancho stabilizer failures that have caused some damage. Mackin 02-21-2005, 05:27 AM the fabtech works just fine ... bolts right up, no extra hardware/bracket required. You have a short cut (as in a hyperlink)for me to "purchase" one? I'd be appreciative! :) When you get the chance,TIA tophog 02-21-2005, 11:13 AM Do you have to take out the old stabilizer? How do you know if the stabilizer is bad? Yes, it's an OEM replacement. I swapped mine at 5K miles. Why? Jump up/down on your factory shocks ...if the stabilizer is anything like the shocks they are JUNK IMO. I could tell a difference after swapping. May not with OEM tires. JohnnyO 02-21-2005, 12:28 PM Yes, it's an OEM replacement. I swapped mine at 5K miles. Why? Jump up/down on your factory shocks ...if the stabilizer is anything like the shocks they are JUNK IMO. I could tell a difference after swapping. May not with OEM tires.Thanks! I replaced the shocks a month ago and they were shot. I never thought to do the stabilizer. | ||