Does anyone have numbers pre and post block off plate?

I have a 4" catless MBRP exhaust, running Superchips on Tow/Performance. I tow right up to Superchip's recommended limit on this setting. I'm hoping I bought some reduction in EGT with the exhaust and EGR blocker but I would like some numbers.

I know, I know - buy some gauges. The only gauges I have seen that I liked were in the headliner console but since I have a moon-roof they won't fit.

Anyway, numbers would be good.

No one has done the EGR blocker with an exhaust gas temperature gauge? Come on guys...

No one has done the EGR blocker with an exhaust gas temperature gauge? Come on guys...

I did the EGR blocker before I put in my Edge insight with EGT and BD manifold so I dont know what I ran before temp wise. Wish I could help.

I believe the Edge Insight to be the cleanest way to monitor parameters if your running a programmer already.

It just plugs into the OBD2 port, sits in the pillar mouth by the windshield. Have to run the EGT from the plug to the pyrometer obviously.

I can monitor EGT, Boost, trans temp, eng temp ect ect ect.