I just put in a Stage IV trans kit and i just ordered a PPE Hot+2 tuner. Im ready to start running it on higher power levels, but im scared to launch it in 4wd without messing something up. Is here anything that i should beef up before doing this, or should i just drop the T-bars and put in new tie rods or sleeves?

Drop the bars all the way down put some sleeves on it and go have fun.

cognito idler and pitman arm supports would also be a good idea

Might Want To Consider A Suncoast Brace.

Might Want To Consider A Suncoast Brace.

After what happened to McRat's T/C I sure would install a Suncoast brace.

a brace and sleeves should do the trick.

do the braces work on the new body styles?

lower t-bars(might even take out bolts), sleeves or hd tie rods, cognito brace kit and x2 on the t-case brace.

def. put some sleeves in it. talked with a guy, while he was on the side of the road, who was racing a cummins when he did a 4wd launch and broke both tie rods and ended up half way in the ditch

so it looks like idler and pitman arm supports,t-case brace, and some sleeves. ne one have a good idea where i can find and get good prices on these parts?

so it looks like idler and pitman arm supports,t-case brace, and some sleeves. ne one have a good idea where i can find and get good prices on these parts?
t-case brace you can get from mike L.
sleeves you can get from super diesel.
steering supports you can get from cognito