I had the lmm on the rack today installing some goodies and saw that a transmission cooler line was rubbing right against the bottom of the oil pan where they route by. The rubbing has already worn off all the paint on the pan where they touch together. I cut a piece of heater hose and wrapped it around the cooler line, tried bending gently but it just went back to touching oil pan. Should I take it to the dealer or will the hose be ok rubbing on the oil pan?

have same problem, just put some hose and so far so good, will probably take in soon.

The dealer will probably bend the cooler line to stop it from hitting... You are better off doing it yourself

I had the lmm on the rack today installing some goodies and saw that a transmission cooler line was rubbing right against the bottom of the oil pan where they route by. The rubbing has already worn off all the paint on the pan where they touch together. I cut a piece of heater hose and wrapped it around the cooler line, tried bending gently but it just went back to touching oil pan. Should I take it to the dealer or will the hose be ok rubbing on the oil pan?


Do u have a pic u can post for us dumbasses?! :D