Hey guys, finally got the level command 2 single gauge setup installed last night after a shipping fubar. Turned out pretty good, kept the comprressor inside the cab, it's quiet and the weather around here is pretty hard on stuff. works great, the adjustability on the fly will be great towin the 5'er...

Very cool! Where did you mount the compressor in the cab? I had a Hellwig air bag assist on my '95 and was thinking of installing the Firestone system on the C2500HD in my sig. Great job!

Mounted it under the rear seat, drivers side. Quiet and keeps it out of the weather. Ran all the wiring/compressor discharge via the door sil, mounted the relay under there as well, all up to the dash then out the firewall w/ the airbag supply and + lead to the aux post under the hood. Grounded the switch and illumination light locally under the dash. Easy but time consuming if you are anal like me...

Interesting. I would have never thought of putting it inside the truck.

thats a great idea, does it fill the tank very fast

I didnt get the tank w/ it. I am going to fab one up, some pipe and a couple of end caps. burn a couple extra holes, add some threaded fittings for future whatever, add a three way valve to the comp at the disch, so I can switch back from tank to bags w/o depressuring one into the other, add a tap for a pressure gauge(tank only) and run that to the cab as well with the extra hose from the kit.

Just got the same set up. Was wondering about putting it inside the cab under the back set (passenger side), but was worried about the noise and heat. But it shouldn't be on for very long when needed.

How long would you estimate it takes to put 25 psi (or any amount you are familiar with) into the bags?