WYOMAX
02-15-2005, 05:10 PM
Where would I find the wire to the wait to start light and what color will it be? Thanks for any help!!!
|
maynard9089 02-15-2005, 05:21 PM Why? If its for an auto starter it shouldn't be necessary. My starter is programable for the delay. I have it set at 7 seconds. The installer had set it to 45 seconds but that was way too long for my LLY. HD-Nate 02-15-2005, 05:21 PM Behind the instrument panel is a plug. On the plug is a blue wire, this is your wait to start. It is in position #2 on the bottom row next to the brown/white. If you need a tach wire, it is in postion #5 same row and is white. HD-Nate 02-15-2005, 05:29 PM Why? If its for an auto starter it shouldn't be necessary. LLY. Call me crazy but I like it when my DMax tells the starter when its time to start not the starter telling the DMax its time to start. WYOMAX 02-15-2005, 05:34 PM Thanks HD_NATE On below zero days I dont think mine waits for the light to go off befor it fires up and some time it has to try it again. It was option that is there so I will give it try and see if it works. Thanks again, maynard9089 02-15-2005, 05:45 PM I see what you are saying but is 7 seconds too much to wait. The light never lasts for more than a second on my truck. A few seconds afterward isn't about to make a difference. To each there own. I just like to keep it simple. I have never had my truck not start on the first try, at least that I have noticed anyways. I have never plugged her in and its gotten pretty cold here (Buffalo). WYOMAX 02-15-2005, 06:01 PM I have mine set on it longest delay I think and I have seen it start while the light is still on. Mine is design tech I bought it two years ago and just got around to putting it in. The only reason why I chose desing tech was that it used you OEM remote. I should of bought a astro start. jth7186 02-15-2005, 06:20 PM Which model of the Designtech allows you to use your OEM remote? WYOMAX 02-15-2005, 06:24 PM Model #20022 jth7186 02-15-2005, 08:33 PM Thx WyoMax... HD-Nate 02-16-2005, 11:02 AM I see what you are saying but is 7 seconds too much to wait. The light never lasts for more than a second on my truck. YES....sometimes 7 seconds seem like a half hour :lol: After the truck warms it usually does not need the delay and will start right up. Plus, on some very hot summer days, I will use it to cool the truck also, no need for the delay in the summer. It will work either way, I just like it that Astro Start will monitor the truck and let it know when the truck is ready, I think thats cool as heck. | ||