Sorry if the pic's are not the best . I am pretty stupid on this computer/camera stuff

1st one ...With H2's and no badging & trim
2nd one ...painted front lower airdam and billet grill



file:///C:/Documents%20and%20Settings/Kevin/My%20Documents/My%20Pictures/Img0001/DSCN0113.JPGfile:///C:/Documents%20and%20Settings/Kevin/My%20Documents/My%20Pictures/Img0001/DSCN0112.JPG

OK , Looks like I am dumber at this picture stuff than I thought...I'll try again

Hope the pic's worked this time

Looks good! What year is the vette?

Thanks ...

The vette is a 74 Roadster "survivor" car ...One owner ( a friend of mine ) Not my first choice for year . But the wife had to have it after we took it on our Honeymoon 18 yrs ago...Sentimental reasons ...You know !!

The heck with the Vette, that truck looks GOOD. What size tires are those and do you have T-bars cranked or anything?

Got to run ...Have to get the HD down to the dealer (see my other post on Tires )

Kevin

Number9

The tires are 265/70/17's Only cranked the t-bars 2 turns (didn't need to for clearance ) Just to bring up the front a little ...The H2 wheels are 8.5 inch with 5.5 of that back set ..No rubs

Looks good! :thumb:

What did you use to paint the lower plastic on the bumper?

Wasted Income ,

I had it done when the front end was getting repaired.. (dont ask , see earlier post about the wife and truck) But I know it was the factory black base coat with a "matt" clear coat ...
I am told it should dull down a bit more in the next few months and will match the upper bumper black plastic even better...
They painted it black with clear to start,but it was too "shiny" ,Is that a word?, for me. So they used the "matt" and toned it down ...I like it !!

Cool.

Thanks!