|
XAMARUD 70 05-01-2008, 10:48 PM After putting on an MBRP 4" Turbo-Back w/ Quad Stealth 2 set on 50 HP im getting excessive dash vibration. My Truck idles about 600-650 RPM and when i increase throttle to about 700-750 it idles as smooth as glass. I guess im asking if i can increase idle w/ the quad or go under the hood and do it manually? Jasondt2001 05-01-2008, 10:49 PM It's all electronic, you can't do it by hand. Quad I don't know anything about though... Why don't you just find the rattle and fix it? - Jason XAMARUD 70 05-01-2008, 11:08 PM Its across the whole dash, would bumping up or down the tune help? XAMARUD 70 05-01-2008, 11:10 PM Oh sweet, im a diesel fanatic now! Sorry, im back. tomrex 05-01-2008, 11:11 PM 600-650 is a normal Idle. Unless mines in regen (800RPM's) it sits at 600-620. In gear, it used to rattle. There's a little flappy thing under the "front panel" on the dash that was out of whack on mine. I pulled it apart, glued the rubber flap back on and stuck the panel back in...no more rattle. :D XAMARUD 70 05-01-2008, 11:17 PM 600-650 is a normal Idle. Unless mines in regen (800RPM's) it sits at 600-620. In gear, it used to rattle. There's a little flappy thing under the "front panel" on the dash that was out of whack on mine. I pulled it apart, glued the rubber flap back on and stuck the panel back in...no more rattle. :D Im going to have to take a look at that in the morning and see if maybe that is causing my rattle, Thanks | ||