Redapple
02-11-2005, 01:09 AM
Took truck to dealer last weekend, removed Juice w/Attitude. HAd some free time after work today, put Juice back on, first 2 tries to start were a no go. Removed connectors, re-installed stock connectors, started but check engine light is on. Re-install Juice, starts and runs fine, but Check Engine light won't go out:mad: . Did sone searches for this prob, but none fit my senerio. Don't have a code reader, how or where can I go to read & reset code. Truck seems to run fine.
Bill
socaldieseltech
02-11-2005, 01:28 AM
Need to see what codes are stored. PM me if you want to swing by and I can check it for you.
Redapple
02-14-2005, 12:07 AM
socaldieseltech:
Thanks for all your help. All is well with the Redapple!!
Bill:ro)
Max Power
02-14-2005, 12:15 AM
Tell us what was wrong. It could help someone with the same problem in the future.
RickDLance
02-14-2005, 12:29 AM
I had this happen because some of the prongs had slipped inside the connector. I pulled them back into place with a pair of needle nose pliers and all was fine!