|
: installed edge/attitude today. LB7UP 02-09-2005, 11:46 PM what a snap,,, easy as pie, drilling and tapping was way easy, kinda fun too, although I am a mechanic and have been turning wrenches for about six years it was still easy and i feel most people with some mechanical know how could tackle it.........:ro) Max Power 02-09-2005, 11:49 PM Congrats. Why are you in front of your computer? You should be driving it. ):h :ro) :grd: GMC2500HD 02-10-2005, 12:04 AM This is just the beginning.... LB7UP 02-10-2005, 12:38 AM figured i would give the tires a break.. after all they were getting kinda hot..... i like the power in level two, have not hammered it yet.... Salmonbum 02-10-2005, 06:36 AM I just ordered mine today with the A-pillar mount and I have a Question. I removed the factory A-pillar to look for a place to pass the Attitude wire down inside and thru the firewall but I couldn't see anywhere that I could just run it thru. Are you guys drilling a hole or just taking it under the fuse panel and thru the door jam into the engine compartment? I really don't wanna drill and holes in the firewall and I would like it to be somewhat readily removable without notice. toy fever 02-10-2005, 06:57 AM LB7UP, Have fun and ditto GMC2500HD... ...only the beginning!!! Salmonbum-I have mine run down and out the door jam. Went to the local salvage yard and picked up an extra piece of a-pillar trim for less than $20. Now with the attitude mounted to the a-pillar, I just pull the entire trim piece out and put the original back in for trips to the dealer. Makes removing everything very fast and clean. wakeboarder 02-10-2005, 07:21 AM I ran mine through the same whole as the hood release cable. LB7UP 02-10-2005, 10:21 AM hood release cable works great, you can do it there no problem thats what i did.... going to get a pyrometer gauge so i can hook that in for stealer trips.. they cant say much about a aftermarket heat gauge...... pt536 02-10-2005, 11:46 AM hood release cable works great, you can do it there no problem thats what i did.... going to get a pyrometer gauge so i can hook that in for stealer trips.. they cant say much about a aftermarket heat gauge...... I am also thinking about getting a pyro gauge to put in for trips to the dealer...Which pyro will work with the attitude probe? diesel man 02-10-2005, 12:59 PM lb7up - put it on level 5 and punch it . | ||