Which is the best intake guys. Lets hear some personal experience. Dyno sheets, specs, ect. Which enhances the turbo the most also?

what are you looking for in the intake? looks?

I have the S&B and I'm happy with it. I don't have any dyno or track results though. When the mounting studs on my OEM box broke off I decides to go with the S&B which was considerably less expensive than the OEM. I fits good, looks good and so far no problems. It did make the turbo a little louder too.

There is a poll here between S&B and Banks Ram Air with some links to dyno results.

I would say stock unless you are running upwards of 600hp you don't so much need to worry about the intake.

Stock with the TxC mod, unless you want the 'bling thing'.

Stock with the TxC mod, unless you want the 'bling thing'.

+1

Where can I find the TXC mod for the intake?

http://www.coolmyduramax.com/joomla/index.php?page=shop.browse&category_id=6&option=com_virtuemart&Itemid=30

:)

what are you looking for in the intake? looks?
4in tube or bigger, and lots of flow. I like to hear the turbo but thats not as important as airflow to me. btw currently I run a stock swiss cheese box. Planning to add the TXchris to the 2005 as the fan runs alot during the summer towing and drags the truck down and I also want something like a S&B or AFE for my 2001 I plan on taking this truck to 500+ hp. Just looking for suggestions.

I have a AFE intake with blue filter and haven't had any problems with it yet!

Bang 4 the Buck... S&B all the way! Love it, cheap, looks good, flows great, sounds good, and soposta be one of the best filters around.

Pics of mine on LB7 in garage.

I have the Banks Ram Air intake and filter.........works well with my exhaust, which I had already done.......my truck's EGT seems to cool down faster than the factory setup and no codes thrown with the Banks setup

Stock, with the Kennedy airbox mod, and 4" intake, pic's in my garage. I know...looks hoky to some, but it works..and costs a total of 60.00 and 30 mins to do..also use the oem filter..:D

Stock, with the Kennedy airbox mod, and 4" intake, pic's in my garage. I know...looks hoky to some, but it works..and costs a total of 60.00 and 30 mins to do..also use the oem filter..:D
that is exactly what I want, can you tell me how you did it and what to buy?

that is exactly what I want, can you tell me how you did it and what to buy?

Check your PM's...:D

Stock, with the Kennedy airbox mod, and 4" intake, pic's in my garage. I know...looks hoky to some, but it works..and costs a total of 60.00 and 30 mins to do..also use the oem filter..:D

that is exactly what I want, can you tell me how you did it and what to buy?

Check your PM's...:D
he got that from me under ~45 bucks:D

the black 4" is ABS sewer pipe i got picks in my garage as well;)

4 people chose other, do any of you want to elaborate?

PPE mod?

Should add that to your poll since swiss cheesing is for 01-05's.

thanks for the reply, i dont know how to add a category though

Want me to add it?

4 people chose other, do any of you want to elaborate?
i was one of them

http://www.dieselplace.com/forum/garageimage.php?do=full&p=22434&d=1167615380

whole thing off the truck
http://www.dieselplace.com/forum/garageimage.php?do=full&p=27528&d=1173150609

sure

Its added.

he got that from me under ~45 bucks:D

the black 4" is ABS sewer pipe i got picks in my garage as well;)

Could you possibly give me a shopping list for you intake? Its awsome!!

Thanks.

i have afe stage 2

X2



Could you possibly give me a shopping list for you intake? Its awsome!!

Thanks.

X2

You resurrected a 17 month old thread for that?