Baldwin fuel filter [Archive] - Diesel Place : Chevrolet and GMC Diesel Truck Forums

: Baldwin fuel filter


HK45
04-12-2008, 04:05 PM
I purchased some Baldwin fuel filter for my truck. Today I had my buddy change the fuel filter for me. 3 filters later they all leak from the seals. Why is this? My buddy works for GM, so I cant think of anything he is doing wrong. Also my sensor is pretty new. No matter how hard you tighten or how loosely you leave it ,it just leaks. Any tips since I don’t have my truck for the next 2 day since I don’t have any oem filter around and the dealers are closed. Thanks

dentpusha
04-12-2008, 04:08 PM
did your buddy get the old seal out

HK45
04-12-2008, 04:28 PM
Yep, The bottom seal seem to go in very easy unlike the oem filter that are kinda hard

dozerboy
04-12-2008, 05:13 PM
Baldwin are good filters...

HK45
04-12-2008, 05:21 PM
How much does the sensor need to be tightened up?

RI Chevy Silveradoman
04-12-2008, 05:46 PM
Tighten the WIF sensor up tight and snug, keeping in mind they are plastic threads. How about the outside larger o-ring for the outside rim? Do you have the correct fuel filter?
Also, moved thread to Maintenance/Fluids.

RI Chevy Silveradoman
04-12-2008, 05:50 PM
Fuel Filters for our Duramax's are:

Fuel Filters

Baldwin - BF7827
Donaldson - P550743
AC Delco - TP1298B
Wix - 33910
Napa - 3910
Purolator - F55464
Parker/Racor PFF5544
GM 97385488
Luber Finer LFF8736
Carquest 86910
Fleetguard FF5501
Hastings FF1220
Isuzu 8973854880
Champion LFF8736B

RI Chevy Silveradoman
04-12-2008, 06:06 PM
HK 45:

Also make sure that you install the new rubber o-ring for the WIF sensor! It should come with the package.

HK45
04-12-2008, 07:38 PM
Ri Chevy thanks for the info. The fourth filter did not leak. Very weird but it seemed that on the first 3 filters the sensor was like not in on one side for some reason. The last filter it sat flush.

ARM
04-12-2008, 09:40 PM
:eek:They Are Made In China Also!!!

Arm

RI Chevy Silveradoman
04-13-2008, 05:23 PM
A while ago, I remember reading there was a bad batch of filters going around the circuit. I am not sure if they were part of the bad batch. The filters were all leaking from the WIF sensor.

btfarm
04-13-2008, 05:40 PM
Jeeze... That's alotta damn $ to find out you have 3 defective filters! If it was me I'd be pretty soured on Baldwin about now...