I have an '01 (obviously), but where I work I get to see a lot of trucks pulling trailers. And after a while I have become very faund of the gear shifter (in an automatic) of the '03+ models. They're just fatter and look more comfortable. Does anyone know if I would be able to replace mine with one out of a newer truck?

Nobody? I really don't want to have to ask the Chevy stealer

an 03-05 would interchange no issues

the 06 with the tap shift wouldnt work

Thank you

just wrap a roll of electrical tape around yours. Should increase the thickness of your shifter :D :D

just wrap a roll of electrical tape around yours. Should increase the thickness of your shifter :D :D

Not a bad idea, I'll get right on that.

Oh! Almost forgot, thats what she said

but i dont think the 03-05 is any different than my 01 was other than the tow haul picture is different

just wrap a roll of electrical tape around yours. Should increase the thickness of your shifter :D :D
:funnypost

but i dont think the 03-05 is any different than my 01 was other than the tow haul picture is different

Thats what i was thinken too. Maybe he seen a 06 and up 6 speed ally shifter, they are alot bigger.

Thats what i was thinken too. Maybe he seen a 06 and up 6 speed ally shifter, they are alot bigger.

You know what, that maybe the case. But would that still fit?

You know what, that maybe the case. But would that still fit?

it has the tap shift on it so you would have 2 buttons that did nothing but they use the same pin to hold the shifters on all gm cars. as for the t/h wiring and all im not sure id say its a no go though.

Not even sure the wiring would be the same on the 03-05. It has the overdrive lock out built into the tow/haul. so i'm sure that the wirng would be different. I'm sure its managable though with some good schematics(sp)

Joe

Hmm, well, I'm going to see if I can pick one up and just mess around with it. Who knows maybe I can get it figured out. I've got nothing but time on my hands.