|
roper202000 04-04-2008, 07:59 PM Ok now after doing a lot of reading i am going to chane my blown head gasket, but i still have some unanswered questions. i know you have to pull the intake and exhaust but do i have to pull the injector pump? im sure as i get into this i will have more questions but for now this is the only one...... lol for now! NVW 04-04-2008, 08:03 PM The IP can stay in place. Leo acesneights1 04-04-2008, 08:07 PM Leave the IP but I would remove the lines. You'll need a crows foot. You should not have to mess with the timing. teroma25 04-04-2008, 08:32 PM Leave the IP but I would remove the lines. You'll need a crows foot. You should not have to mess with the timing. X2...also any accessories that are attached to the heads along with t-stat crossover. I leave exhaust manifolds on and only remove downpipe, turbo and crossover. You doin' both sides or only one? roper202000 04-05-2008, 10:20 PM cool i was worried i would have to pull the injector pump. and yes i figured if im already going in to do the one im crazy for not going ahead and doing both dont cost much more to do both. and with my luck i would do the one and next week the other would blow! lol guess now would be a great time to install my boost and pyro gages. | ||