OK,

This was original plan: 7-9" Cognito lift, but I have a bad feeling about this because I hate cranking up my t-bars so I can fit my 37x14's. So......Im asking can I do this??


Buy a true 6" kit, and then throw on a 3" PA body lift to clear those tires so I dont have to crank my t-bars. Let me know what yall think!
<!-- / message --><!-- sig -->

I don't think that there are body lifts available for HDs with a Duramax/Allison, to me putting a body lift would be worse than cranking the torsion bars, Just buy a bigger lift, I have a Fabtech 8" and had to crank my bars to clear my 37s but mostly because they are 37x13.5, when I had 37x12.5's I barely had my bars cranked.

Ya, Performance Accessories makes a kit, just trying to keep the cost down but it looks like I will be doing just a suspension lift. How do you like your Fabtech lift?? I have heard some good things about it and some really bad things about it?? Also if you could post some pictures on here or send me some at: Coles_555@yahoo.com

My Fabtech kit is alright, would go CST next time around though, Haven't had any problems at all with anything breaking yet.
Jason