: ATS tranny install/Colorado
IBDMAX'IN 02-02-2005, 07:15 PM I'll be installing the ATS Triple Lok T/C, ATS Co-pilot, Triple Pak this weekend at Deadeye's house this weekend on Saturday and Sunday. Anybody who would like to help or see the install first hand is more than welcome to drop by and check it out. There will be beer and lots of tools :ro) .
Should be rather informative for anyone thinking of doing this themselves. Reply back if anyone is interested and needs direction to Johns house in Arvada.
Mike L. 02-02-2005, 07:23 PM Do the C4s while your at it.
Trippin 02-02-2005, 07:51 PM Do the C4s while your at it.
:exactly:
4x4man 02-03-2005, 10:03 AM :cool2:
Hmmmm... Deadeye isn't too far away... I need to finish getting the house preped for new siding install, but wouldn't mind checking it out and lending an extra hand if needed. I will shoot a PM to Deadeye as I don't have directions to his house anymore.
Bob
IBDMAX'IN 02-03-2005, 11:34 AM Thanks Mike for the info, buuuuuuuut, unless you have a c4 fund for poor guys like me it looks like it will have to wait untill this summer and hope that they hold untill then.
If you don't mind I'd love to get ahold of your phone#, I have a couple of questions I'd like to run by a pro!!! (if you don't mind)
Micheal Tomac 02-03-2005, 11:37 AM put in the single sided c1's if you plan on doing many boosted launches or plan on dragracing or truckpuling
ratlover 02-03-2005, 11:46 AM if you are running syn fluid its going to cost you an extra 100$ to crack the case later. My c4's were burnt running a 6700# truck on 265's on a 90 hp juice(and turning it up to 125 for the 2weeks before I did the upgrade) no pulling or drag racing just playing on the street. At least look at the darn things and align all the oil groves if your going to do it.
IBDMAX'IN 02-03-2005, 12:24 PM Well looks like in the last hour things have changed a little bit, just got off the phone with Dmaxallitech and he is going to overnight some stock c4's just so I have them. What a great bunch of people we have here on the site!!!!
Eric made it real clear that they will most likely need to be done. And if not at least I know that I don't have junk in my tranny.
Kyle03D 02-04-2005, 09:08 AM Single sided c'1 are included with the kit now.
dmaxalliTech 02-04-2005, 12:38 PM Wade, lemme know what ya think of the packaging when you get it:lol:
IBDMAX'IN 02-04-2005, 02:29 PM I haven't seen it yet but I think I can make an educated guess :think:
sp33d 02-06-2005, 10:39 AM Wade, lemme know what ya think of the packaging when you get it:lol:
Trouble maker :D
IBDMAX'IN 02-06-2005, 09:55 PM :phatyo: I liked the packaging!!!
BMDMAX 02-07-2005, 12:02 AM We had fun putting it together. :)
IBDMAX'IN 02-07-2005, 01:46 PM :thumb: I'm sure you did!! Thanks again, I really appreciate it!!
4x4man 02-07-2005, 01:48 PM How did the install go?? Sorry I couldn't make it up there.
IBDMAX'IN 02-07-2005, 01:52 PM It went smooth as silk!!! :ro)
Lookin to put some big power down on the ATS dyno this weekend if everything goes as planned!!
It's ok Bob, I'll see you on Sunday or Saturday if you decide to go.
Deadeye 02-07-2005, 05:43 PM [QUOTE=IBDMAX'IN]It went smooth as silk!!! :ro)
QUOTE]
actually, it was more like smooth as slidin in tranny fluid ;)
that tranny (and t-case) are HUGE :eek:
and they sure hide a lot of fluid :p:
Well now that Wade has worked on both types of tranny's he is ready for a new career :ro) give him a call he is now the CO tranny expert (well, except compared to ATS ):h )
IBDMAX'IN 02-07-2005, 05:52 PM Yes.........I can, :grd: .
What's this except ATS stuff??? :nutkick: OUCH!!!! LOL
DReese 02-16-2005, 01:07 PM Nice looking truck! I just got one also & also live in Aurora! Small world.
4x4man 02-16-2005, 02:29 PM Don,
Welcome to the site!! I responded to your PM.
Bob
|