|
lipamax 03-29-2008, 08:15 PM Hi guys, I'm looking to replace my stock shocks for better ones. My truck is lowered 4" back and 2" front. Any ideas what will be the best for my application? Thanks. 07.5 LMM 4X4.10KMi Nor-Cal Nick 03-31-2008, 01:53 PM What did you use for your lowering. Product? Nor-Cal Nick pa32rt 03-31-2008, 07:03 PM I like my Rancho RS9000s. 9 settings of adjustment. lipamax 04-05-2008, 10:06 AM I did McGaughy's 2" spindles drop up front and 4" shackles/hangers rear. Hey pa32rt. Are these RS9000 for lowered trucks? pa32rt 04-05-2008, 01:18 PM I did McGaughy's 2" spindles drop up front and 4" shackles/hangers rear. Hey pa32rt. Are these RS9000 for lowered trucks? They are standard RS9000 adjustables, as far as I know. They just got them in the right length for my amount of lowering. Since you did spindles, your shock height is the same as stock. That didn't move. So, just get shocks that replace stock ones. Nor-Cal Nick 04-07-2008, 12:56 PM I did McGaughy's 2" spindles drop up front and 4" shackles/hangers rear. Hey pa32rt. Are these RS9000 for lowered trucks? FYI .. if you did not do a notch or change any compression bump stops on your truck then stock height shocks will work. I would use Zinc 5100 Bilstein's. Nor-Cal Nick | ||