I posted in the wanted section but I don't know how many 6.5'rs look there

"I am looking for a used Controller (does not need to work) to Cut up and use for a bracket to make a TM.

Also could use an Injector Line to Make a Pop Tester."

PM if you can help me out.

Isnt that called a Belt???


:lol:

sorry, I HAD to!

Just cut the one up you have, it only takes <1/2 hour to make one that way. Either that or you can get some 2" x 3" aluminum angle iron and mark the holes, and copy the bracket that way. i have made 5 or 6 now, getting pretty good at it. What i want to do is find out what spring is on a turbomaster and make a front mount (like a tm or the old 92-93's).

I just don't want it to maybe go bad then have nothing for my truck.

I just don't want it to maybe go bad then have nothing for my truck.

It took me 1/2 hour and $3 at the hardware store. I also have a welder. without a welder it would just take alittle longer and you would need a longer threaded rod from the hardware store. If you have a boost gauge and you can't get it done you can just wire the wg shut and make sure you don't overboost it till you finish. If you don't have a boost gauge its probubly better to leave the wg alone until you get one.
Mines a 95 and its a front mount.

pm sent