bubba
02-01-2005, 12:49 AM
hi guys-does anybody know the part number of the GM torsion bar keys used to raise up a stock 2500-3500 hd duramax 4x4 truck ??http://www.dieselplace.com/forum/images/smilies/grd.gif
|
WileE1 02-01-2005, 03:49 PM Hey Bubba, I have a set of never installed Victoria (green keys) I bought for my totaled 2500HD, since my new one already had a set in it, these have been sitting in my garage. 50 bucks to your door PERM01 02-02-2005, 09:48 AM are those the same as for a gasser? Sollly 02-02-2005, 10:32 AM What do you want keys for? Just crank it. WileE1 02-02-2005, 11:42 AM Only problem with that is the bolt in the stock key is only so long, the green key sets the bolt back to normal specs (instead of toping out the bolt it repositions the torsion bar). In my first HD I stripped the factory key's threads trying to level it since it ran the bolt all the way out, I ordered the victoria offroad set but had my truck totalled before they showed up :( Sollly 02-02-2005, 06:31 PM If you are cranking them that much you probably would be better off going with a small lift to realign everthing. Plus you will have "0" down travel left. | ||