|
woodrow246 03-17-2008, 03:44 PM Curious to find out actually how much oil flows through the spin on? is it just a slipstream or does it get it all. My thoughts were that it has a primary filter, and the spin on is a portion of the flow to ease tranny wear and improve ease of maintenance. Any thoughts....... Cougar GT-E 03-17-2008, 04:44 PM No expert, but I was under the impression that it was 100% flow filtration. Would be nice to have a real expert comment.... jb Crafty1 03-17-2008, 04:52 PM No expert, but I was under the impression that it was 100% flow filtration. Would be nice to have a real expert comment.... jb No, its a low flowrate through the spin-on. It filters the oil going to the valve body solenoids only. Flow varies, but roughly 1 gpm, compared to 5 or 6 gpm for the cooler system. woodrow246 03-17-2008, 05:34 PM Ahhh, thanks alot! it all stemmed from the magnet covering up a little more of the holes on the napa filter, than the ally spin on, and got concerned about flowrate... Cougar GT-E 03-18-2008, 10:42 PM No, its a low flowrate through the spin-on. It filters the oil going to the valve body solenoids only. Flow varies, but roughly 1 gpm, compared to 5 or 6 gpm for the cooler system. Learn something new every day - especially here! jb | ||