edge w/ attitude..help!! [Archive] - Diesel Place : Chevrolet and GMC Diesel Truck Forums

: edge w/ attitude..help!!


odslim
03-16-2008, 07:33 PM
quick question.. 2007 cc ss lbz classic.. got the edge w/ attitude. So far so good, dont really abuse the truck, daily driver, doesnt really see level 2 on the programmer. The only thing is that the edge doesnt disable the limiter..( Im stuck at 92mph) stock.. So im shootin down the hwy, it suck that it doesnt allow me to finish off that stroker or cummer, know what i mean?. so my question is , id really hate to get rid of the edge module, so is there anything else out there that i could do , or safely stack another programmer, I need some opinions guys.. im trying to avoid the unistalling selling part of it.. Im open to all opinions.. regardless the situation.. thanks guys..

ar077
03-16-2008, 08:36 PM
That sucks! I've pegged the speedometer several times since disabling the speed limiter with my Superchips tuner (and in the process ditched several Fords and Dodges). I thought all tuners had that feature. If the Edge doesn't, pitch it!

wahlrite
03-16-2008, 10:04 PM
I have a bully dog programer that I use for tire size correcting and top speed limiter adjustment.

I set the power part to stock, make the adjustment to the tire size and MPH limter and program it.

I called edge and asked if this was ok, they said that as long as I kept the bully dog on stock power program I would be fine.

So now my speedo is correct and I can go as fast as I want, and the juice is working like a champ

olboy82
03-16-2008, 11:11 PM
I baught a predator handheld programmer cause it was cheap and I wanted to disable the speed limiter and adjust for my tire size kinda like what you are talking about and I use the edge j/a for adding power and I have never had any problems with the stack.

odslim
03-17-2008, 01:36 AM
I baught a predator handheld programmer cause it was cheap and I wanted to disable the speed limiter and adjust for my tire size kinda like what you are talking about and I use the edge j/a for adding power and I have never had any problems with the stack.


thanks guys for the replies.. so what would be the cheapest way to go as far as a programmer that would do the job what im looking for ??

wahlrite
03-17-2008, 11:38 AM
when your play'en with 40,000 dollar trucks, their aint nothing cheap.
some are just less expensive that others

Good Luck.