Hi, Just got my new truck and am figuring out what I wanna get in order. I am going to put boost and pyro gauges in the overhead console with Trippins gauge mount. I wanted to know what the best way to route the wires and boost line is. Towards drivers side or passenger side? I plan on getting either header pipes or the BD manifold. What all do you need to remove or loosen when routing the wires from up there? I know the headliner. Thank's, Adam Glad to finally have a Duramax

i put mine in the over head consol & down the pass side & the 8' tubeing for the boost wasnt long enough order 10' to play it safe its cheep. pyro was fine. power wires down the driver side

O.k, I'll have to do that then. Nice avatar by the way

I opted for the dirver's side. You can remove the trim piece that covers the pillar on the dirver's side, through the space behind the fuse panel, though the gromet by the brake pedal, and across the firewall to the pyrometer. I used the SD manifold, which was quick and easy to install for the boost connection.