Getting ready to paint a pillar for gauge install. Light gray interior.

Thanks
Rob

Pull the current A-pillar cover off, there is a sticker on the backside that has the paint code for the interior color.

My Neighbor shot my gauge pillar and he had me pull the cover off and wrote down the info from the sticker.

Mine is Med Gray.

Easier than pulling the A-pillar is just to look inside the fuse panel cover. The color code is right there. I popped mine and took it into an auto paint store and they looked up and mixed me a spray can full on-the-spot. Mine is Charcoal.

Thanks for the replies. I ended up going to the local diesel shops and they had some already canned.

Idle,

How do you know which interior is yours? My fuse panel lists all seven colors. I am also trying to paint my gage pillar.

I think light gray would be the "GRAY" number - but I would have the paint shop verify that (most of the reference books have a paint sample chip). I just carried my panel into the shop with me, they mixed it up in a spray can in about 10 minutes for $16.

Idle,

How do you know which interior is yours? My fuse panel lists all seven colors. I am also trying to paint my gage pillar.
The easiest thing to do is find your local deisel shop that installs gauges and stuff. They usually have thier paint custom matched. The paint code will get it pretty close. My local shop said they went back 12 times for an exact match, or as the above poster said take your panel into the local auto body paint supplier and have em match it.

Thanks guys