is u got the 4" magnaflow, post some pics, iam wanting to get the 4" turbo-back kit for mine...post some pics, and how the sound is....thanks

No pics but the install was easy..mine starts at the down pipe below the turbo and back. It sounds great but does have a slight drone.....not really that bad. I installed it close to 3 years ago and it's never rusted or came loose. I like it pretty well.

No pics but the install was easy..mine starts at the down pipe below the turbo and back. It sounds great but does have a slight drone.....not really that bad. I installed it close to 3 years ago and it's never rusted or came loose. I like it pretty well.


do u run a tip on urs???

Here are some pics of my system that I just installed last week. I put the MBRP front pipe on then went with the magnaflow catback system. In stall was a breeze took about a hour and a half to remove the old and install the new. Probably could have done it quicker but i wanted to leave the stock stuff intac incase i needed it for something. If your looking for a vendor i would really recomend Nate w/ PTP he was a great guy to work with and i couldn't find any better pricing.

Here are some pics of my system that I just installed last week. I put the MBRP front pipe on then went with the magnaflow catback system. In stall was a breeze took about a hour and a half to remove the old and install the new. Probably could have done it quicker but i wanted to leave the stock stuff intac incase i needed it for something. If your looking for a vendor i would really recomend Nate w/ PTP he was a great guy to work with and i couldn't find any better pricing.


thanks man, how do u like the sound of it????

Dking, also does urs make alot of soot on the truck about it without a tip???

The tail pipe section exits about the same general area of the stocker. It will soot up the bedside, so if you are worried about it, get a turn down tip to eliminate the soot. Or you could move the pipes around a little, get a longer tip and exit it like I did to the corner of the bumper. I only get a little haze on the corner of the bumper now.

The tail pipe section exits about the same general area of the stocker. It will soot up the bedside, so if you are worried about it, get a turn down tip to eliminate the soot. Or you could move the pipes around a little, get a longer tip and exit it like I did to the corner of the bumper. I only get a little haze on the corner of the bumper now.


the pictures of Dkings truck in my post it seems to hang lower then on ur truck??? why would that be??? iwant it to be up closer to the body like urs.....thanks

the pictures of Dkings truck in my post it seems to hang lower then on ur truck??? why would that be??? iwant it to be up closer to the body like urs.....thanks

I just moved the pipes around a little bit to get that angle. The tail pipe and the over axle pipe are two piece so you can adjust the pipe to about any position you want.

I just moved the pipes around a little bit to get that angle. The tail pipe and the over axle pipe are two piece so you can adjust the pipe to about any position you want.


thanks man, i'll probally be callin u sometime soon, soon as things slow down alittle here....

thanks man, i'll probally be callin u sometime soon, soon as things slow down alittle here....

Let me know.

thanks man, how do u like the sound of it????

Love it. Nice and deep when you first start up then about all ican hear at ideal is the turbo whistle. But when your full throttle people around you will know it. i have noticed a little drone when accelerating with normal driving conditions but just going down the highway i havent been able to hear much difference between stock.

I just moved the pipes around a little bit to get that angle. The tail pipe and the over axle pipe are two piece so you can adjust the pipe to about any position you want.


this is correct. you can tweek the pipes around to fit them to your liking. you just have to watch the clearence on the shock and the spare tire when you do. I wanted mine to be located in about the stock location so that is why mine is where it is at. i havent had much problem with soot yet but i have only had it on about a week and a half or 2 something like that. But then agian i do live in the Texas panhandle where a calm day is when the wind is blowing 10-20 mph so the soot ussually has some extra help getting away from the truck.

Love it. Nice and deep when you first start up then about all ican hear at ideal is the turbo whistle. But when your full throttle people around you will know it. i have noticed a little drone when accelerating with normal driving conditions but just going down the highway i havent been able to hear much difference between stock.


did u get any codes or CEL when u put it on????

If your looking for a vendor i would really recomend Nate w/ PTP he was a great guy to work with and i couldn't find any better pricing.


dking- Thanks buddy!;)

did u get any codes or CEL when u put it on????


nothing as of yet. and i have been running it pretty hard this past week.