I have a Dahl/Baldwin 100 with a 101 (2micron) element and want to confirm that it was installed correctly. Does anyone have installation details with photo's, etc.? There are apparently 2 fuel filter lines, one larger than the other(?). Does anyone have a schematic view/diagram?

Thanks, Brian.

The larger of the two is the one you want. The smaller is the return to the tank.

Greg

Greg,

Thanks for the reply. Do you have details, or can you point me to a resource, that can help me understand the fuel system? I would like to know, for example, if the OEM fuel filter is in the recirculation loop, or does the recirc. loop by-pass this filter?

Thanks again for your help.

Brian.

Brian
I don't have anything but the return comes right back from the engine. The supply going to the engine goes through the filter.
Greg

Seems like someone would have a schematic diagram.

Thanks again, Brian.

Try http://www.baldwinfilter.com/lit/form4100.pdf for help.

Antt,

Thanks for the reference. This has answered a few of my questions, however, I'd like more specific information on the D-Max fuel delivery system. Things like, how many pumps are there, where are they, etc.

Thanks again. Brian.