hlhinc2000
03-03-2008, 07:40 PM
Do you guys know if an 8' fisher MM2 from a 2005 2500hd gasser will fit my 2008 2500hd d-max? I'm talking the push plates and the complete set up. Any help is appreciated!!!
|
Drillchart 03-03-2008, 08:54 PM According to the fisher website (http://www.fisherplows.com/ematch.asp) everything will fit but the headlight wiring harness. It seems the blade, the common attachment, and pecuilar attachment are all the same the only difference I noticed was the headlight wiring harness. Good luck. nextlevel38 03-04-2008, 05:54 PM the push plates will fit . however you will need the new light harness and you will have to change over the 3port module from the 4 port. atleast thats what you have to do with the v-plow dreamer7 03-04-2008, 06:15 PM i have heard that the diesel is like 2" higher or summat...oh well, if you have the trucks measure it please | ||