ReconR1
02-18-2008, 12:05 PM
is the backspacing ok to run a 6inch lift(full drop kit) with H2's??i heard some guys say that you cant do it b/c of the backspacing..thanks.
|
moore87 02-18-2008, 03:14 PM As long as it is a full drop kit you should be alright DMAX Will 02-18-2008, 03:21 PM You can always run a spacer so they don't rub on the UCAs i think ReconR1 02-18-2008, 05:23 PM great, thanks.. Loader 02-18-2008, 11:04 PM It depends on the kit. Check the manufacturer. Some will say you can NOT run stock wheels and some will say you can. Swampfox 02-19-2008, 12:33 AM I ran H2's and 315's with my 7-9" Cognito with 1/4" spacers up front. Bolyard 02-19-2008, 12:51 AM IIRC its mainly with spnidle lifts. If the lift was a full drop utilizing factory or OEM spec spindles then you should be alright Aprilwine 02-19-2008, 11:59 PM IIRC its mainly with spnidle lifts. If the lift was a full drop utilizing factory or OEM spec spindles then you should be alright You're right, but you can run H2's on some, if not all, of Cognito's spindle lift kits. ReconR1 02-20-2008, 08:03 AM yea, its a Pro Comp full drop kit, so i guess im good..i sure wish someone here would show a pic of their 6" lift with H2's,,,seems like eveyone just gets custom wheels after the lift and only run h2's when leveling...:( jdugie123 02-20-2008, 09:47 AM i think that is because of the fact that most lifts don't allow you to use the factory wheels so most will budget in new aftermarket rims with the lift hill1430 02-20-2008, 07:38 PM If you look in my garage, there is a picture of my black 06 all dirty. It is wearing H2's with a 6" lift. | ||