|
GB87 02-09-2008, 02:22 PM so basically i want to run the PPE Hot and i want to be able to run it on the highest setting but i dont see upgrading anything else for awhile so what kind of tranny am i gonna need to hold that much power? ive been reading so much about PPE, SC, ATS, etc that im about to go blind that i just need a "this will hold that much power". also what cost am i looking at? thanks 06Dmaxpwr 02-09-2008, 03:17 PM Start searching through some threads, tons of info on what your looking for....first thing where are you located? I recommend running up to Michigan to Merchants shop and letting him rebuild it and be set! I might also suggest at minumun a lift pump or something for a little extra fuel...might not be able to pull that much fuel on PPE's tune GB87 02-09-2008, 04:57 PM im in idaho but i do make trips back to northern california once or twice a year to visit family pmeg1 02-09-2008, 05:00 PM If you are in Cali alot I would try Mike L. He is a vendor here and an allison "guru". 06Dmaxpwr 02-09-2008, 05:05 PM If you are in Cali alot I would try Mike L. He is a vendor here and an allison "guru". There you go, id go to Mike also! I believe he has a new shop and name...pending..... I believe but just look him up in the vendor section (Inglewood trans.) | ||