duramaxdiesel
01-11-2005, 04:05 PM
My IROK's measure out to 36.8". What would the setting be in mm in order to get my true speed to appear on my Attitude? Right now it's at 2500mm and I don't think that is correct. Thanks, Nick.
|
: What Setting For Edge and 37" Tires? svpdiesel 01-11-2005, 04:22 PM 1 inch = 25.4mm duramaxdiesel 01-11-2005, 06:42 PM Cool thanks. That would mean I would put my Attitude at 914.8mm right? Max Payne 01-11-2005, 08:21 PM 2951.0 according to the Attitude instruction manual... You aren't measuring height, rather you are measuring rolling diameter IIRC. Jonathan G 01-11-2005, 08:53 PM 2951.00mm is what my manual says too. BassinRVer 01-12-2005, 12:39 PM I have found the best way to set the attitud for the correct tire hieght is to do this. Simply match the speed of your speedo with your attitude monitor. Max Payne 01-12-2005, 01:33 PM Wouldn't really work if your speedo is incorrect because of the larger tires...I have found the best way to set the attitud for the correct tire hieght is to do this. Simply match the speed of your speedo with your attitude monitor. BassinRVer 01-12-2005, 01:54 PM It works if you set up your powertrain correctly. I have 4:10 gears and the speedo is dead on. Wouldn't really work if your speedo is incorrect because of the larger tires... Max Payne 01-12-2005, 02:55 PM True, true...It works if you set up your powertrain correctly. I have 4:10 gears and the speedo is dead on. | ||