D-maxedinny
01-31-2008, 05:26 PM
I just bought a set of 22's and 325/50/22 nitto terra grapplers. Anyone know what backspacing is acceptable? These look like they are about 6" of BS. With the rims so big will they clear the spindles?
|
Meuth0001 02-01-2008, 12:50 AM yeah i have 22x11 KMc wheels and they have a big backspacing on them ... they dont even get close to the spindles whatsoever 5.slow 02-01-2008, 12:53 AM Mine were 22x9.5 with over 6 inches of BS and they were fine. D-maxedinny 02-01-2008, 05:39 AM That is what I like to hear 148CMEUPHI 02-01-2008, 10:53 AM Make sure the people answering your questions know what your talking about. So far none of them have RCD lifts in their sig. The RCD is a spindle lift and does not use the factory spindles. I have thought about running 22's myself, but i have the same question you do. Meuth0001 02-01-2008, 10:57 AM i had a spindle lift on my buddys truck we ran 24x10 on them 5.5 bs and they got close to rubbing the spindle but still worked huthuthut 02-01-2008, 11:11 AM Theres no way a 22 will interfere with a 6" RCD lift. | ||