I know this doesn't relate (directly) to full size trucks, but the 2 problems I am having isn't with my 2500HD truck, it's with my 94 S-10 4x4.

1) The transfer case buttons are acting up(or something related to them):
I can get it to go into 4 low, but not 4 high. When I push the 4 high
button, both the 4low and 4high lights light up and it does not go into
4 wheel drive. However, when I push the 4 low button it does go into 4
wheel drive low range(as long as I am in neutral and going less 3 MPH And when I push the 2 wheel drive button it
goes back into 2 wheel drive. It just doesn't want to go into 4 high.
The Haynes manual barely touches on this topic.


2) The drivers side power window is not working (stuck up). The passenger side works fine and the power door lock mechanism works fine. I can hear and feel a ticking noise in the door when I engage it to go down but it will not go. I am wondering if it's in the switch, motor, or something else.

Any help would be greatly appreciated!