|
milo 01-22-2008, 08:13 PM ok my tranny blew and i found a used one for a good price but it is for a 1994. so will a 1994 4l80e fit into a 1995 that had a 4l80e in it. and will everything work or do i need to change my solinoids or some thing? thanks thefermanator 01-22-2008, 08:53 PM They should be one in the same. Jess_sr 01-22-2008, 09:26 PM May have to update the wire harness depending on which plug is on it. The old one had a torx screw that held it on. The later was just a squeeze type. milo 01-22-2008, 09:43 PM is it hard to update the wiring harnesse FastCR 01-22-2008, 10:13 PM If it doesn't work out, I have one out of a '95 with low miles. Not sure what kinda price your getting though... milo 01-22-2008, 10:40 PM im getting it for 200 and it is local milo 01-25-2008, 12:08 PM ok so the 94 will not fight into the 95 the linkage arms wont work. Deere3594 01-25-2008, 02:13 PM ok so the 94 will not fight into the 95 the linkage arms wont work. X2, sorry I didnt read this sooner, just found out the same thing :mad: | ||