RLohman
01-12-2008, 04:03 PM
We changed the gear ratio from 3.73 to 3.42 for fuel milage. Where can I get a vehical speed sensor buffer to correct the speedo:)
|
jifaire 01-12-2008, 04:25 PM I PMd you a webpage for DIY 90-95 GM. If it's for a different vehicle, can't help you (you really should have put that info in your post, ya know... poke, poke) RLohman 01-12-2008, 04:57 PM Sorry 95 2500 6.5 9.25 ring gear chrisk1500 01-12-2008, 07:07 PM Just modify your existing one..... RLohman 01-12-2008, 10:07 PM that will work to how jifaire 01-12-2008, 10:18 PM Follow the directions I PM'd you to build your own. OR, contact the guy to build you one. Your call. phantom 309 01-13-2008, 01:37 AM Follow the directions I PM'd you to build your own. OR, contact the guy to build you one. Your call. Is this top secret? or just in conflict with some vendor as usual? nick jifaire 01-13-2008, 03:09 AM Is this top secret? or just in conflict with some vendor as usual? nick The guy gives good instructions on how to build your own, which is a legal post, but then he says, "if you don't want to build your own, you can send money to this address and I'll build it for you". It got pulled off ehre once before because he's selling something, so I figured I wouldn't post it again. However, I PM'd you the page address .. if anybody else wants it, send me a note. 4doorTAHOE6.5TD 01-13-2008, 10:04 AM GM appoints/licenses shops to supply the VSSB/DRAC & certain electronic parts./componets Any given area is going to have a supplier. Local GM dealer parts dept. is the place to contact for the suppliers name. Instructions are available to DIY for nix also . The ratio change is 8% in direct gear so a shorter tire can be a corrective remedy also. thefermanator 01-13-2008, 01:19 PM The ratio change is 8% in direct gear so a shorter tire can be a corrective remedy also. This would defeat the purpose of the gear swap. And you have to get it pretty DANG close or else the ABS will be going nuts. | ||