94 rear fenders? [Archive] - Diesel Place : Chevrolet and GMC Diesel Truck Forums

: 94 rear fenders?


ghitch75
12-31-2007, 01:45 PM
workin' on a buddys 94 1ton dually crew and he wants new rear fenders.....anyone know where to get them?

Deere3594
01-02-2008, 03:00 PM
Have you tired the dealer? I know there is a aftermarket site that sells them, I cant seem to think of it now... Ill post if I remember..

Deere3594
01-02-2008, 03:03 PM
I found the site I was thinking of, PM sent..

z79outlaw
01-02-2008, 05:18 PM
Beware of aftermarket fenders they require quite a bit of work for a flush fit. I just put some on my truck cause I was in a pinch regret it. First thing you have to do it cut out all the studs on the dually fender and drill out holes and use bolts instead, the holes in the box wont line up with the studs on the fender that and the studs on the fender are barely in there, they'll pull out before you can even get the fender tight to the box. Then you'll have to contour the dually fender to fit with the box, because the fender is pretty flat so you'll have big gap otherwise. Your best bit is if the fenders are salvagable reuse them, or search for a used box or fenders, its more work than its worth in my opinion to use aftermarket fenders.

sandmoffroad
01-05-2008, 01:12 AM
Try CK Restoration parts.I know they sell them for about $200each I think.

ktmmotocross88
01-05-2008, 08:13 PM
My 98 had one aftermarket on it and every hole had to be drilled out. But it did save $200