RickDLance
12-30-2007, 12:33 AM
How many different parameters can you log at once when you're hooked to your laptop?
|
Jasondt2001 12-30-2007, 12:36 AM I think I've got around 24 selected and monitoring. Though some PID's dont play well with others, like if i log oil pressure my speedometer doesnt read, and if i log fuel temperature or balance rates RPM/speedo and timing go nutty... fire0021 12-30-2007, 12:44 AM yep if i try to log more then like 10 at a time it gets a little wacked out balanc erates take alot of data so i alwyas log those by them selves RickDLance 12-30-2007, 01:14 AM Thanks Guys!! I'll have to play with it a little. I was wanting 27.:( sweetdiesel 12-30-2007, 01:20 AM 26 channels is the max if you want any accuracy IIRC its channels and NOT pids that we need to worry about 26 pids selectd could be as many as 30+ channels Strange about the fuel temp......Ive never had a issue with that and i always log fuel temp.I wonder why you have issues? and as for balance rates if i dont log RPM with it,It doesnt work i also log ECT when checking balance rates Jasondt2001 12-30-2007, 01:21 AM Sure man, I dont think its the NUMBER of PIDs you log, I think it's how they interact with one another. You may be able to get 27 depending on what they are... sweetdiesel 12-30-2007, 01:24 AM Thanks Guys!! I'll have to play with it a little. I was wanting 27.:( there is ways around it:) learn to log voltages then its only one channel sweetdiesel 12-30-2007, 01:26 AM Always look to the right and see how many channels the PID has some pids need 4 channels RickDLance 12-30-2007, 02:15 AM This is what it shows me. Selected pids: 27 Selected channels: 48 of 96 scan mode: Dynamic PIDs: 27 (pri 1:22, 2:0, 3:5) Channels: 48 (pri 1:36/36, 2:6/6, 3:6/6) DURAtotheMAX 12-30-2007, 09:09 AM Class 2 is too slow to log anything more than that. LB7's and LLY's are pretty limited as to what can be logged at once. LBZ's are really fast! First time I logged my buddy's LBZ my mouth dropped :eek: sweetdiesel 12-30-2007, 12:44 PM This is what it shows me. Selected pids: 27 Selected channels: 48 of 96 scan mode: Dynamic PIDs: 27 (pri 1:22, 2:0, 3:5) Channels: 48 (pri 1:36/36, 2:6/6, 3:6/6) thats a lot of channels:eek: are you trying to log everything possible +:D RickDLance 12-30-2007, 06:27 PM Yes.):h It did do 26 pids. Still having pryo logging problems though. Jasondt2001 12-31-2007, 12:54 AM Yes.):h It did do 26 pids. Still having pryo logging problems though. My pegasus pyro doesnt like to come on at odd times, if i switch from position 1 to position 2 or vice versa it comes alive... go figure..? The Autometer Pyro is always perfect...Either position sweetdiesel 12-31-2007, 01:21 AM Rick if you posted you selected PIDs i bet we could clean it up and get more accurate data Jason......now that you have been logging EGTs, what is working best? Jasondt2001 12-31-2007, 01:29 AM Well the autometer is WAY more reliable and much faster responding than the pegasus unfortunately. I have both and the autometer is the one i always want but then i lose my gauge... LOL. IT's a certain autometer probe, for the ultralite II series gauges, the ultralite I's did NOT work. If you want, i have a log of the autometer and the pegasus plugged in at the same time and you can see what i mean. | ||