i can read fuel lvl, tps, rail, coolant, timing,...............


but not active oil pressure..................................... i have v17.3


any news or am i sol


thanks

There's a thread here somewhere where I talked about it with Ross. I searched, but could not find it.:( I'll keep trying.

Seams like there was a second pid that worked. Might look.:)

I've logged oil pressure with my truck. Maybe it only works on the LBZ ECM.

Sorry it took so long.;)

http://www.dieselplace.com/forum/showthread.php?t=168027

Sorry it took so long.;)

http://www.dieselplace.com/forum/showthread.php?t=168027
http://www.dieselplace.com/forum/showpost.php?p=1901192&postcount=5

iirc
GM.ENGOILP is not a slectable pid for me it has an "X" through it:o:
GM.EOPS is the same as above

ill double check when i go home for lunch

Please post it. We'll hopefully get to the bottom of this.:)

Please post it. We'll hopefully get to the bottom of this.:)
i will

btw i made this thread in relation to my current problems
http://www.dieselplace.com/forum/showthread.php?t=199726

I went back and looked at my logs. I had previously logged the GM.ENGOILP, but when I got back and look at the logs it is kind of messed up now. Maybe something got out of whack with a recent update.

Bummer. Good luck with it Adam.

Hopefully the fine folks at EFI Live will be awake and posting soon.:)

I went back and looked at my logs. I had previously logged the GM.ENGOILP, but when I got back and look at the logs it is kind of messed up now. Maybe something got out of whack with a recent update.
i get "not a valid PID" when i try to select it

i get "not a valid PID" when i try to select itI haven't tried logging it since the new updates have come out. Like I said before. It used to display the correct oil pressure, but now it's all haywire. I wonder if something got out of whack in one of the PID files.

I haven't tried logging it since the new updates have come out. Like I said before. It used to display the correct oil pressure, but now it's all haywire. I wonder if something got out of whack in one of the PID files.
i got the last update when i bought the system back in feb/march

adam have you dowmloaded 7.5 and updated your firmware

i can read fuel lvl, tps, rail, coolant, timing,...............


but not active oil pressure..................................... i have v17.3


any news or am i sol


thanks

adam have you dowmloaded 7.5 and updated your firmware
see the above;)

wow version 17.3 must be some secret squirll stuff :rolleyes: aslo i can log oil presure no problem

wow version 17.3 must be some secret squirll stuff :rolleyes: aslo i can log oil presure no problem
no smart ass V1 7.3:p:

got 7.4 update... still no oil pressure pid

so you dont have the latest then hugh 7.5 is the latest as well as a update for the tuner

so you dont have the latest then hugh 7.5 is the latest as well as a update for the tuner
from reading the 7.5 is a beta version mainly v2 and gasser updates

For LB7 there is no oil pressure PID that is logable, the ECM only sends the oil pressure value to the cluster, not the scantool. We can create a DMA PID for it.
For LLY use - GM.ENGOILP to log Pressure
For LBZ/LMM use - GM.ENGOILP to log Pressure or GM.EOPS to log Sensor Voltage

We made some changes a few months ago to this part of our software, if your no longer getting the right values, please email ross a log and he will look into it.

Cheers
Cindy

Thank You Cindy!
:bow:

For LB7 there is no oil pressure PID that is logable, the ECM only sends the oil pressure value to the cluster, not the scantool. We can create a DMA PID for it.
For LLY use - GM.ENGOILP to log Pressure
For LBZ/LMM use - GM.ENGOILP to log Pressure or GM.EOPS to log Sensor Voltage

We made some changes a few months ago to this part of our software, if your no longer getting the right values, please email ross a log and he will look into it.

Cheers
Cindy
hmm sound like i go mechanical....

i will pm ross about it;)

Sorry I didn't know malibu. :( I'm and all LLY guy now.:)

Sorry I didn't know malibu. :( I'm and all LLY guy now.:)
yeah you and that bastage 03 truck:p:

Malibu, Ross has created your LB7 DMA PID for Oil pressure.

Josh, Ross has also fixed the scaling problem on the LLY PID.

You can download the new software here http://forum.efilive.com/showthread.php?t=6824

We'd appreciate some feedback to make sure it's all working properly :)

Cheers
Cindy

Malibu, Ross has created your LB7 DMA PID for Oil pressure.

Josh, Ross has also fixed the scaling problem on the LLY PID.

You can download the new software here http://forum.efilive.com/showthread.php?t=6824

We'd appreciate some feedback to make sure it's all working properly :)

Cheers
Cindy
well i got down loaded and un zip... still cant read the file that ross posted

thinks it is something i did computor wise