iviper123
12-01-2007, 02:14 PM
what a pain!!!!!!!!!!
currently working on changing it, no luck so far, any helpfull tips???
currently working on changing it, no luck so far, any helpfull tips???
|
qwomack 12-01-2007, 03:21 PM Never changed one but I would think WD-40 would go a long way towards making it an easier job. iviper123 12-01-2007, 03:29 PM i already sprayed them for a couple days ahead of time w/pb blaster qwomack 12-01-2007, 03:32 PM The only other thing I can think of is heating the nuts. Beyond that, I would break the studs, remove the manifolds (a real PITA) and drill and tap for new studs. Good Luck. daustin 12-01-2007, 03:33 PM When i did mine, i sprayed them down several times a day for about 3 days. The started it up and let the manifolds get warm to the touch where i just could touch them, but not hot enough to burn the fingers. They came off pretty easy then. Good luck. Don nickg 12-01-2007, 04:03 PM Try this: http://dieselplace.com/forum/showthread.php?t=184388 izyahdaddy 12-02-2007, 02:27 PM mine had 230,000 miles on it and had problems breaking loose..someone on here told me to..spray with pb buster let it sit for about 30 min. then drive the truck for about 30 to heat up bolts..let it sit for about 30 to cooll a bit and they all broke loose with ease...it worked for me | ||