Sorry to post a new thread , but im stuck here on which is which for the nictane head.

If anyone can post a pic or describe which is in/out I would be much ablidged.

No arrows? It's not marked in and out?

http://www.nicktane.com/images/fuelfilters/Nicktane%20Duramax%20Fuel%20Filter_Ver2_%20Install %20Instructions.pdf

thanks max.....
Im looking at the file and it DOESNT show a pic of the head. It only states that its marked with arrows.

I cant get to it without unbolting it and its a ***** to do.


Do you have more info?????

The outlet is closest to the bleeder port on the top of the head if it is a CAT head.....

If it is not a CAT head then I have no clue......

Hope that helps.

TONY

Its the one that came with the nictane kit, I think thats cat correct?

Thanks for the help by the way.

No "Problem"

TONY

Depends when you bought it.Nick went to the Perma Heads. Most run left to right and or look at the inlet should flow outside element and the outlet draw thru the filter media center.

Mac

OK got enough of a feel of it that the bleed feels likes its towards the front end of the truck.

Anyone know it thats correct.

Its just too difficult to drop down.

You want the bleed on the clean (out) side or it wouldn't bleed the filter can!

I bought the filter kit from nick one year ago nov.

Do you know if the clean side is towards the front of the truck?

Just follow the way it runs. The one that leads to the outside is in and the one that leads to the center is out. Too bad you don't have a Mega, there's perfectly clear instructions on the site...

I just couldn't help it...

Ox

Just follow the way it runs. The one that leads to the outside is in and the one that leads to the center is out. Too bad you don't have a Mega, there's perfectly clear instructions on the site...

I just couldn't help it...

Ox
LMAO ):h ):h ):h

It has one on each side, not middle /side.

nick called me and sorted it all out.

Front end is the clean side.

Thanks nick....