Ok,
2006 LBZ no lift

The wheels i want are17x9 with a -12 offset.
Tires are 265/70/17

Does anyone have a similar set up that can warn me about any rubbing issues. The calculator I'm using says it will stick out 41mm (1.6 inches more than stock. The back spacing is the same as stock so I'm not worried about that and i"m not worried about the height either. just the amount that they stick out with no lift.

If anyone is curious, the wheels are MKW off road M27s

ive got 33-12.50-18 toyo muds with 4.5''bs and -12mm OS and i had to do some trimming and green keys...but before i ran 265's with no problems

ive got 33-12.50-18 toyo muds with 4.5''bs and -12mm OS and i had to do some trimming and green keys...but before i ran 265's with no problems

Did you run the 265s on that same wheel?

no it was an 16'' wheel 8'' wide...thats all i know about it...sorry :(

I've got 20x10's with -21mm and 33X12.50... What your doing should work.

yea x2 i think you are gonna be fine...

I've got 20x10's with -21mm and 33X12.50... What your doing should work.

do you have any pictures of the fender well cutting?