What is the part number for the Napa Gold two quart oil filter?

The one quart is the 1060, but I can't find the two quart.

Thanks in advance,

Before going down that road you sure a 2 qt will fit on a K (4x4) series truck before swapping to remote kit I could barely clear my stock filter in there.

Have you gone to napa.com and asked the question, I highly recommend a remote bypass filter kit several vendors I bought Kennedy's AMZOIL kit with adapter to accept Baldwin filters, just being able to access the filter which is a real PITA on K truck was worth it to me.

Also bypass element keeps oil cleaner, I'm in midst of oil longevity testing myself; last oil sample I ran was at 6400 mi on oil sample, posted as normal safe for continued use I'll check again at 7500, that will probably be my new change interval up from 3500 if results still come back as good.

OK

Thanks for the info and I will look into the remote kit.

That was one of the things that was supposed to happen on my last adventure, but didn't.

The NAPA 2qt filter is #1794. It will fit on a 4x4. I used to use them before I found out that the 2qt does not have a back flow prevention valve like the 1qt filter. This is not good with the filter in the a horizontal position although I'm not sure that very much oil would drain out anyway with the filter below the area of the block where the 90 degree adaptor mounts. I have since installed the Amsoil remote bypass.