Hi, my truck has had the "Change Engine Oil" message coming up every time I start up, is there a reset for this? Obviously I have changed the oil regularly. Thanks!!!

Point...it is in your service manual, but there is 2 ways to reset it. If you have the DIC steering wheel controls, push the gas insignia until it shows the Engine Oil percentage. When you see that, push and hold the enter button on the lower right hand side of the wheel. It will reset it to 100%. Or...turn the ignition key to the ignition on, engine off position. When you do this, push the throttle to the floor 3 times in the first 5 seconds. That will also reset it.

Thanks CrazyDave! I will be doing the second method you mentioned, no wheel controls for me! Thanks again.


):h