I'm looking for an Electric Fuel Gauge for the LBZ in cab. So i can see the press. after the fuel filter. I know they make one for under the hood, but i would like one in cab. Anyone know of one? Done one? Know where to get the fittings?

Autometer sells them I know that for sure, I am also sure other major guage manuf. make them as well. Make sure you get a electric one, you do not want a mechanical guage where you have to run the fuel into the cab. Get ready, they are pricey around $189 or more.

Thanks, I'll hafta call K/D to see it he has the fitting for the air bleed on the filter. Than again it does look like an 1/8" Pipe thread. Anyone know?

You probably want one of the electric gauges for a carb setup, they only go to 15psi or so.

if I recall correctly the bleed screw is a metric thread. 10 x 1.5 I believe I used a fitting that went from the bleed screw thread to a number 4 AN male then a female to male fuel outlet with a cap.and finished it off with a holley 15 psi guage ( or you could probably put an electric guage sending unit in there and run the wire to a guage in the cab) i'll try to get a pic tomorrow and post it here or in my garage

check out www.dieselmanor.com (http://www.dieselmanor.com) they have fuel pressure and rail pressure gauges. Theuy looks great. Those gauges are on my list to buy! :D:o: