Just went under the truck to look at the lines and plan the job. Still need to buy that took for the line. Anyways how are you all getting the line off between the cooler and the fuel tank. Truck is a long bed BTW. I looked up between and I don't see it so is this one removed just by feel??

Thanks for tips.

you can see it. its up behind the cooler (but does not connect to the cooler)..sometimes if you take the 2 bolts out of the cooler you can get to it easier.Just went under the truck to look at the lines and plan the job. Still need to buy that took for the line. Anyways how are you all getting the line off between the cooler and the fuel tank. Truck is a long bed BTW. I looked up between and I don't see it so is this one removed just by feel??

Thanks for tips.

Just went under the truck to look at the lines and plan the job. Still need to buy that took for the line. Anyways how are you all getting the line off between the cooler and the fuel tank. Truck is a long bed BTW. I looked up between and I don't see it so is this one removed just by feel??

Thanks for tips.

Nick helped me with this. Once you get the tool, you'll see how it slips over the fuel line. I disconnected the line off of the tank first per the instructions for the LBZ. I traced the line back to the connection point behind the fuel cooler. I was able to get my hand and the tool up to the connection point coming in from the driver's outside aspect. I slipped the tool on the line and pushed into the connection and then wiggled the line back off of the connection point. You kinda have to work the tool into the connection as there as I recall 4 internal keepers/tabs on the fitting.

Cool stuff. Thanks for the replies.